DETAILED CONTROLS AND GAUGES OPERATION REMARK The engine will not start, if the safety lock lever is not in the LOCK position. First make sure that the safety lock lever is in the LOCK position, and then turn the engine starting switch. Horn Switch 0. When the button (2) at the tip of the right work equipment con- trol lever is pressed, the horn will sound. Lamp Switch 0. This switch (3) lights up the working lamps and panel lamp. Position 1: Panel lamp lights up Position 2: Panel and working lamps light up. OFF position: Lamps goes off. Cab Heater Switch 0. (Machine equipped with cab) This switch (4) is used to heat the operator's compartment.
The flow rate of the hot air can be set to two levels. H position: Strong L position: Weak Hot water from the engine is used for heating. Heating is possi- ble when the engine cooling water is hot. 3-12