OPERATION DETAILED CONTROLS AND GAUGES Windshield Wiper Switch 0. (Machine equipped with cab) This switch (5) actuates the front window wiper. (a) OFF: The wiper stops. (b) ON: The wiper moves continuously. (c) The wiper moves continuously and window washer fluid is sprayed out. When the switch is released, it return to (b). (d) Window washer fluid is sprayed out. When the switch is released, it return to (a). REMARK Do not keep the switch pressed at the washer spray position for more than 10 seconds continuously. Do not press the switch to the washer spray position if the washer fluid container is empty. Pump Drive Emergency Switch 0.
NOTICE The emergency pump driving switch is provided to make it possible to carry out work for a short time when there is a failure in pump control system. It is necessary to repair the abnormal location as soon as possible. This switch (6) is provided to enable an operator to temporarily continue with work in an emergency, i.e. something unusual occurs in the controller, which makes the hydraulic pump inop- erable. (a) EMERGENCY: Pull up the switch to this position. (b) NORMAL: Hold the switch in this position normally When the switch is held in "EMERGENCY" and released, it automatically returns to "NORMAL". Room Lamp Switch 0.
(Machine equipped with cab) This switch (7) is used to turn on the cab lamp. ON position: lights up OFF position: goes off 3-13