OPERATION DETAILED CONTROLS AND GAUGES REAR WINDOW 0. (Machine equipped with cab) When the rear window is removed, the glass will drop, so carry out the operation with two workers: one worker removes the bolts and the other worker supports the glass. It is possible to remove the rear window. Remove the rear window as follows. 1. Remove 3 bolts (1) at the top from inside the cab. When the bolts are removed, spacer (2) and button (3) will drop, so one worker should stand outside the cab to catch the spacer and button before they fall. 2. Remove 4 bolts (4) at two places in the center from the inside of the cab. 3. Remove three bolts (5) at the bottom from outside the cab.
When bolts (5) are removed, the glass will drop, so one worker should support the glass securely. 4. Rotate the glass approx. 30є when removing it. 5. After removing the parts, put them in a bag and store them in a safe place to prevent them from becoming lost. Install the rear window exactly, in reverse order of removal. Check the rear window after installation to make sure that there is no clearance in the window. 3-23 WARNING