Kaiyi — Kaiyi BAIC Steering System Technical Manual

(15) The spool set will push out the assembly tool guide. The O-ring is now in position. 7405S STVLV48(1) (16) Put the steering unit back into the holding tool keeping the bore vertical. Place the cross pin in the spool/sleeve so that it is parallel to the port flange. 7405S STVLV48(2) (17) Put the ball into the hole indicated by the arrow. 7405S STVLV48(3) (18) Screw the threaded bushing lightly into the bore. The top of the bushing must lie just below the surface of the housing. 7405S STVLV48(4) 5-32