(19) Grease the O-ring with mineral oil approximate viscosity 500 cSt at 20 C and place it in the groove. 7405S STVLV49(1) (20) Place the intermediate plate so that the channel holes match the holes in the housing. 7405S STVLV49(2) (21) Grease the O-ring with mineral oil approximate viscosity 500 cSt at 20 C and place it in the groove. 7405S STVLV49(3) (22) Place the distributor plate so that the channel holes match the holes in the intermediate plate and the housing. 7405S STVLV49(4) 5-33