Komatsu — CHECK BATTERY ELECTROLYTE LEVEL

MAINTENANCE MAINTENANCE PROCEDURE 1. Remove floor mat (1) and cover (2). When Checking Electrolyte Level from side of Battery If it is possible to check the electrolyte level from the side of the battery, check as follows. 1. Open the cover at the right side of the machine. 2. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L) and LOWER LEVEL (L.L) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. 3. If the electrolyte level is below the midway point between the U.L and L.L lines, remove cap (1) and add distilled water to the U.L line. 4.

After adding distilled water, tighten cap (1) securely. REMARK If distilled water is added to above the U.L line, use a pipette to lower the level to the U.L line. Neutralize the removed fluid with baking soda (sodium bicarbonate), then flush it away with a large amount of water or consult your Komatsu distributor or battery maker. 4-27