MAINTENANCE PROCEDURE MAINTENANCE CLEAN AND INSPECT RADIATOR FINS If compressed air, high-pressure water, or steamhit your body directly, or they cause dirt or dust to be blown up, there is a hazard of serious injury. Always use safety glasses, dust mask, or other protective equipment. NOTICE When using compressed air, if the nozzle is brought too near the fins, the fins may be damaged. Carry out the cleaning from a reasonable distance to prevent damage to the fins. Do not direct the jet directly at the core. If the fins are damaged, it will cause leakage of water and over- heating. On dusty jobsites, carry out this inspection every day, regardless of the maintenance interval. 1.
Remove 3 bolts (1), then remove the grill on the right side of the machine. 2. Use compressed air to blow off the mud, dirt, or leaves clogging radiator fins (1). 4-50 WARNING