MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL FEED PUMP PRE-FILTER G Do not replace the pre-filter just after stopping the engine, since each part is still hot. Wait until each part has cooled down. G After replacing the pre-filter, connect the fuel hoses securely ao that fuel will not leak. G Do not bring fire or spark near the pre-filter. G Prepare a container to catch the fuel. 1. Set the container to catch the fuel under the pre-filter (1). 2. Set the fuel control lever to the low idling position. 3. Remove pre-filter (1) from the clamp (2). 4. Loosen clamp (3) and remove fuel hose (4) from pre-filter (1). 5. Loosen clamp (5) and remove fuel hose (6) from pre-filter (1). 6.
Connect fuel hoses (4) and (6) of new pre-filter (1), then secure them with clamps (3) and (5). 7. Install pre-filter (1) to clamp (2). 8. After replacing the pre-filter, bleed air. For the air bleeding procedure, see "REPLACE FUEL FILTER ELEMENT (PAGE 4-48)". 4-51 WARNING