Komatsu — BEFORE STARTING ENGINE

MACHINE OPERATIONS AND CONTROLS OPERATION CHECK FUEL LEVEL, ADD FUEL Be careful not to let the fuel overflow when adding fuel. This may cause a fire. Wipe up all fuel that is spilled. If there is sand where the fuel is spilled, remove all the sand. Fuel is flam- mable and dangerous. Keep it away from any flame. 1. Insert the key in starting switch (1), and turn in to the ON position to light up the monitor. 2. Check the remaining fuel level with fuel gauge (2). If the level is low, open the cover on the right side, and watch level gauge (G) while adding fuel through fuel filler port (F). Fuel capacity : 19 liters (5.02 US gal.) 3. After adding fuel, tighten the cap securely.

REMARK If breather hole on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. 3-24 WARNING