. OPERATION MACHINE OPERATIONS AND CONTROLS 3 - 70 8. Clean, check rear vi ew mirro Check for damage t o the rea r view mirror . If damaged, replace i t with a new mirror. Clean surface of the mirror and adjus t angle so area at t he rear can be seen from the operator's seat 9. Seat belt and moun Check for damage o r wea r to the seat belt and mounting clamps. If there is an y damage, replace with new parts. 10. Check stoppe r plate Check tha t there is no abnormality in the stopper plate. If any a bnormality is found, clean it or replace it with a new