Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING and any problem is idler, guard) for damage, wear, loose bolts, or leakage of 3 - 69 Walk-around Checks Before star ting the engine, walk around the machine and look at th e underside o f chassis for anything unusua l like loose bolts and nuts, leakage of fuel, oil and coolant. Also check the condition of the work equipment and the ystem. for loose wiring, play, and collection of dust at places that reach high temperature.

onditio an hydraulic s Also check for loose wiring, play, and co llection of dust at places t hat reac h hig h temper Remove any flammable materials from aroun d the battery, engine, muffler, turbocharger, o r other hi gh temperature engine parts. Leakage of f uel or oil will cause the machine t o catch fire. Check carefully, b e sure to repair any probl em, or contact your Komatsu distributor. Perform th e following inspections and cl eaning every day before s tarting engin e for the d 1. Check for damage, wear, play in wo rk equipment, cylinders, li nkage, hoses Check found, ylinders hoses. If 2. Remov e dirt and debris from around the engine, battery, and r adiator.

Check etc.) ar flamma for dirt accumulated around th e engine and radiator.Also check f or flammable m aterial (dry l eaves, t wigs, ound the battery, engine mu ffler, turbocharger, or other high temperature engine parts. If any dirt or ove them. ble materials are found, rem 3. Check for coolant and oil leakage ar ound the engine Check it. for oil leakage from the engin e and coolant leaks from th e coolin g system. If an y problem is found, r epair 4. Check for oil leakage from hydraulic equipment, hydraulic tank , hoses , and Check for oil leakage. If any problem is found, repair the area where o il is le 5. Check the undercarriage (track, spr roblem is found, repair it. rollers.

If any p oil from 6. Check for problems in handrails, ste roblem is found, repair it. Tig 7. Check for problem in gauges, monit or. Check Clean for problem in the gauges an d monitor in the operator's cab. If any p roblem is found, repla ce the p arts. off any dirt from the surface.