Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS NOTICE If 3 - 96 3. slowly to move the bucket cylinder and arm cyl inder to the end of the stroke. 4. Operate the bu cket for 30 seconds and the arm for 30 seconds in turn fully for When the work equip ment is retracted, take care that it does not interfere with the machine bo 5. After the warm ing-up operation is c ompleted, check that each gauge and monitor lamp is in the following condition: Radiator coolant level monitor (7): OFF Engine oil level monitor (8): OFF Charge level monitor (9): OFF Fuel level monitor (10): Green display Engine coolant temperature monitor (11):

Green display Engine oil pressure monitor (12): OFF Engine coolant temperature gauge (13): Indicator in black range Fuel gauge (14): Indicator in black range Engine pre-heating monitor (15): OFF Air cleaner clogging monitor (16): OFF Hydraulic oil temperature gauge (17): Indicator in black range Hydraulic oil temperature monitor (18): Green display gauge and mo Radiator co nitor lamp is in the f olant level monitor (7 ollowing co ): OFF Engine oil le Charge leve Fuel level m vel monitor (8): OFF l monitor (9): OFF onitor (10): Green d Engine cool Engine oil p ant temperature monitor (11): G ressure monitor (12): OFF Engine cool ant temperature gauge (13):

Ind Engine pre- heating monitor (15) : OFF ): OFF Air cleaner c logging monitor (16 Hydraulic oi l temperature gauge (17): Indic Hydraulic oi l temperature monito r (18): Gre 6. Check for abn ormal exhaust gas color, noise , or vibration. any problem is found, contact your Komatsu d istributor. 7. If air cleaner c logging monitor (16) lights up, clean or replace mediately. the method of cleaning the element, see the element im For details of "CHECK, CLE AN AND REPLACE AIR CLEA NER ELEMENT (PAGE 4-19)".