. MAINTENANCE MAINTENANCE PROCEDURE ADJUST BUCKET CLEARANCE WARNING 4 - 33 It is d angerous if the work equip ment is mistakenly moved wh en adjusting the b ucket clearance. he work equipment in a s Set t safet y lock lever (1) securely to If the re is excessive free pla y on the coupling section of the bucket and arm, adjust the bucket clearance in the following manner. 1. S t L 2. L 3. T 1. S et the work equipment in the position shown in the diagram on he right, then stop the OCK position (L). engine and set the lock lever to the lts (3), plate (1) and plate (5). valent in size to free play (a). the 2. L oosen 3 bolts (2), 6 bo lts (3), plate (1) and plate ( 3.
T ake out shims (4) equi valent in size to free play ( hickness of shim (4) is 0.5 mm or 1.0 mm (0.02 o r 0.04 i n). When free play (a) is l not ompress the shims by 4. T ighten 3 bolts (2) and With this adjustment, cleara nce (b) becomes larger, b ut play ( a) is