. MAINTENANCE MAINTENANCE PROCEDURE 4 - 62 3. Clean the filter with c ompressed air . I f there is oi l on th e filter, o r if the filter is extremely dirty, wash it in a neutral agent . After rinsing i t in water, dry it thoroughly befor e using i t again If the clogging of the f ilter cannot be removed by b lowin g with ai r or washing i n water, replace the filter with a new part. 4. After cleaning, insert the filter in filter case (3) again, o pen the cover at the bottom l eft of the operator's cab by hand, return the filter case to its original position , then close th e cover. When doing this, check that the lock is applied.