Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE PILOT FILTER ELEMENT WARNING 5. Insert a new element, then install filter case (3) and tighten bolt (2). 6. Tighten bolt (2). Tightening torque: 65 to 88 Nm (6.6 to 9.0 kgm, 48 to 65 lbft) 4 - 63 After the engine is stopped, t he parts and oil ar e at high temperature, so there is danger of burns. W ait for the temperature to go dow n before starting t he operation 1. Set a container under drain plug (1) to catch t he oil 2. Loosen bolt (2), then remove filte r cas e (3) 3. Remove element (4). 4. Tighten drai n plug (1)