. MAINTENANCE MAINTENANCE PROCEDURE CHECK WEAR OF FAN BELT, REPLACE, ADJUST Replace loosen adjustment screw (2) and 4 - 65 Checking Check the V-belt a nd when the follo wing conditions exist, r eplace the When th e V-belt makes contact w ith the bottom of the g roove in each When th e V-belt is worn , and its s urface is lower than th e outer When c racking and peeling of the V-belt occurs. 1. Loose move t hem to bracket 2. Insert a bar (length approx. 50 c m (20 in)) in hol e (4) (∅ 18 mm (0.71 i n)) of the tension pulley br acket, then pull strongl y to the front. 3. The sp ring will extend inside, emove belts. Alway s replac e the V-belts as a ill move to the