Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE 4 - 66 Adjustment 1. Tighten a djustmen t screw (2 ) to brin g the tip of the adjustment screw int o contact with tensio n pulley lever (5), then tighte n the adjustme nt screw a further 1 80° and secure wi th locknut (1) 2. If wear is a gap b etween th e tip of a djustmen t screw (2) and tension o adjust ag If way. REPLACE DRAIN FILTER CARTRIDGE 1. Using a filter wrench, turn the filter cartridge (1) to the left to remove it. 2. Fill the new filter cartridge with hydraulic oil, coat the packing surface with oil, then install it.

When installing it, bring the packing surface into contact with the seal surface of the filter holder, then tighten a further 1/2 - 3/4 turns. 1. 2. 1. Using a remove i 2. Fill the n surface with oil, th en install i When in stalling it, bring the packing surface in to contact with the seal surface of the filter holder, t hen tighte n a further 1/2 - 3/4 turns .