. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE of the engine hood, use a filter wrench 6. Clean the filter holder, fill the new filter cartridge with clean oil, coat the thread and packing surface of the new filter cartridge with clean oil (or coat it thinly with grease), then install it to the filter holder. REMARK engine. Check that the oil level gauge is between the H and L marks. For details, see "Check Oil Level in Engine Oil Pan, Add Oil (PAGE 3-73)". 4 - 68 5. from the top of the e remove it. A large a the engine is stoppe is stopped before dr Check that there is no ol d packing stuck to the filte r holder.
I f there is any old packing stuck to the filter, it will cause le akage of 7. When installing, brin g the packing surface into contact w ith the seal surface of the turn. 8. After replacing the fi (F) so that the oil lev (G). Run the engine for through oil fill er port