Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE EVERY 1000 HOURS MAINTENANCE CHANGE OIL IN SWING MACHINERY CASE WARNING immediately after the engine is stopped and may cause serious burns. Wait for the oil 4 - 69 Maintenance for every 10, 100, 250 , and 500 hours of service should be p erformed at the same time. Parts temperature to go d own before perform Refill capacity: 48.6 liters (12.84 US gal) (24.3 lite rs X 2 (6.42 US gal X Set a contain catch the oil. Loosen drain then tighten t he drain plug agai 3. Remove dips tick (G) and air bl plug (1) only when supplying o il to the front mac add the repla cement amount of oil through dipsti 4. After filling machinery. 5.

Wipe off the oil on the dipstick 6. Fully insert di pstick (G) into fille r pipe (F), then re 7. The oil level s hould be between H and L marks o (G). If the oil does not reach the L mark, add oil th port (F). 8. If the oil is ab ove the H mark, d rain the excess e drain valve (P ), and check the oil level again. 9. Immediately after changing the oil, oil level is va So operate fo r one hour, then c heck the oil level