Komatsu — EVERY 2000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING REMARK Check the O-rings in the plugs for damage. If necessary, replace with new ones. 4. Tighten plug (P). 4 - 78 EVERY 2000 HOURS MAINTEN Maintenance for e very 10, 100, 250, 5 00, and 1000 h ours of service should be performe The parts and oil are at high temperature immediately afte r the engine is stopped, and may cause serious burns. Wait for the temperature to g o down before starting the operation. If there is still pre ssure remaining inside the case, the oil or plug may Loosen the plug slowly to release the pr Refill capacity: each 22 liters (5.8 U Refill capacity:

Left, right 22 liters (5 .8 US gal) each Prepare a hand Set the TOP mark at the top, with perpendicular Set a contain to the ground surfac er under plug (P) to c 3. Remove plug s (P) and (F) with the handle and dra in the oil. 5. Add oil throug h the hole of plug (F 6. When the oil o verflows from the hol e of plug (F), ins tall plug (F) Tightening tor que of plugs (P) and (F) : 8.7 - 90.4 lbft) 93.1 - 122.5 N m (9.5 - 12.5 kgm, 6