Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION DETAILED CONTROLS AND GAUGES CONTROL LEVERS AND PEDALS (1) Safety lock lever (2) Travel levers (Machines with pedal and auto-deceleration device) (3) Left work equipment control lever (with auto-deceleration device) (4) Right work equipment control lever (with auto-deceleration device) Safety Lock Lever WARNING When leaving the operator's compartment, set the safety lock lever securely to the LOCK position (L). If the safety lock lever is not at the LOCK position (L) and the control levers are touched by mistake, it may lead to serious personal injury. Check that the condition of the lever is as shown in the diagram.

When pulling the safety lock lever up, be careful not to touch the work equipment control lever. When pushing the safety lock lever down, be careful not to touch the work equipment control lever. Lever (1) is a device to lock the work equipment, swing, travel, and attachment (if equipped) control levers. Push the lever down to apply the lock. This lock lever is a hydraulic lock, so even if it is in the lock position (L), the work equipment control lever and travel lever will move, but the work equipment, travel motor, and swing motor will not work. 3 - 35