Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION DETAILED CONTROLS AND GAUGES Travel Levers WARNING during operations. If the pedal is may suddenly move and cause a careful when operating the pedal for and in reverse when operated This lever (2) is used to change the direction of travel between forward and reverse. ( ) shows the pedal operation. (a) FORWARD: The lever is pushed forward (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral): The machine stops Work Equipment Control Lever This left lever (3) is used to operate the arm and upper structure. Arm operation (A): Arm OUT (B): Arm IN Swing operation (C): Swing to right (D): Swing to left N (Neutral):

When the lever in this position, the upper structure and the arm will be retained in the position in which they stop. 3 - 36 Do not rest your foot on the p depressed by mistake, the mac serious accident. Be extremely travel or steering operations. W rest your foot on it. If the track frame is facing the re be reversed when the travel lev forward when operated in rev forward; the left and right direct When operating the travel lever front or the rear. (If the sprocke the front.) REMARK alarm (If equipped) Machines equipped with travel If the lever is shifted to the forw ard or reverse position from the neutral position, the alarm so unds to warn that the machine is starting to move.