Section 0 - Engine Disassembly and Assembly - Group 00 Engine Disassembly (0-01) M11 Page 0-15 Alternator Belt (Bus Applications) - Removal Insert a 3/8 inch breaker bar into the space provided on the tensioner. Rotate the tensioner away from the belt until it stops. Remove the alternator belt while holding the tensioner back. Alternator Adjusting Link (Non Bus Applica- tions) - Removal Remove the capscrew (1) from the alternator. Remove the capscrew (2) from the thermostat housing and the adjusting link. Alternator and Bracket (Non Bus Applica- tions) - Removal Remove the nut from the alternator mounting pivot bolt. Remove the pivot bolt and alternator.
Remove the mounting capscrews, the bracket, and the spacers.