TROUBLESHOOTING / Troubleshooting A MC FAULT CODE 11402 · Between terminal #A29 of connector MC-A in MC and terminal #2 of connector in solenoid valve unit (SF) (digging regeneration). Connector (Harness end of connector viewed from the open side) MC Connector MC-A T183-05-04-008 #A29 #A32 Solenoid Valve Unit (SF) (Digging Regeneration) T1V1-05-04-003 T5-6-86 Fault Code Trouble Cause Influenced Control 11402-2 Abnormal Current Feedback of Solenoid Valve Unit (SF) (Digging Regeneration) Current: Both of Higher than 920mA or Less than 60 mA Digging Regenerative Control 11402-3 Abnormal Feedback High Current of Solenoid Valve Unit (SF) (Digging Regeneration) Current:
Higher than 920mA Digging Regenerative Control 11402-4 Abnormal Feedback Low Current of Solenoid Valve Unit (SF) (Digging Regeneration) Current: Less than 56 mA Digging Regenerative Control Switch connectors of Faulty solenoid valve unit solenoid valve unit (SF) NO (SF) (digging (digging regeneration) regeneration). YES and other solenoid valve unit (SC, SG or SI). Faulty MC. Check if fault code in Check for continuity in switched solenoid valve YES harness between MC and unit is displayed. solenoid valve unit (SF) (digging regeneration). · Between terminal #A32 of connector MC-A in MC and terminal #1 of connector in solenoid Open circuit in harness.
valve unit (SF) (digging NO regeneration). Faulty solenoid valve unit (SF) (digging regeneration). Open circuit in harness. NO