TROUBLESHOOTING / Troubleshooting A MC FAULT CODE 11401 · Between terminal #A19 of connector MC-A in MC and terminal #2 of connector in torque control solenoid valve Connector (Harness end of connector viewed from the open side) MC Connector MC-A T183-05-04-008 Torque Control Solenoid Valve T1V1-05-04-003 T5-6-85 Fault Code Trouble Cause Influenced Control 11401-2 Abnormal Current Feedback of Torque Control Solenoid Valve Current: Both of Higher than 920mA or Less than 60 mA • Speed Sensing Control • Travel Torque-Up Control • Attachment Pump Torque Decrease Control 11401-3 Abnormal Feedback High Current of Torque Control Solenoid Valve Current:
Higher than 920mA • Speed Sensing Control • Travel Torque-Up Control • Attachment Pump Torque Decrease Control 11401-4 Abnormal Feedback Low Current of Torque Control Solenoid Valve Current: Less than 56 mA • Speed Sensing Control • Travel Torque-Up Control • Attachment Pump Torque Decrease Control Switch connectors of torque control solenoid NO Faulty torque control valve and maximum solenoid valve. pump2 flow rate limit YES control solenoid valve. Check if fault code in maximum pump2 flow Faulty MC. rate limit control solenoid YES Check for continuity in valve is displayed. harness between MC and torque control solenoid valve.
· Between terminal #A30 of connector MC-A in MC and terminal #1 of Open circuit in harness. connector in torque control solenoid valve. NO Open circuit in harness. NO #A19 #A30