Lubrication System/High-Flow Oil Pump 4. Attach oil pump assembly to front plate, tightening cap screws (A) to 50 N·m (35 lb-ft). 5. Rotate pump shaft, again making sure that pump gears turn freely. 6. Install pump drive gear (B) and tighten hex. nut (C) to 75 N·m (55 lb-ft). CD7283 -UN-07MAR95 CD7284 -UN-07MAR95 7. Secure the nut by applying three center punch marks. NOTE: When installing the oil pump, make sure that crankshaft gear and gear of left-hand balancer shaft are not turned (4-cyl. engines only). CD,3274,G25,42 -19-01FEB94 25 36 CTM3274 (01JUL99) 25-36 Saran Liter Engines 060799 PN=197