HT25 - SPECIFICATIONS 95 Ground drive Dual hydrostatic drive infinitely variable from zero to maximum, hand lever operated speed/direction control Service brake Ground drive speed/direction controls brake machine hydraulically when moved to neutral position *Exceeding these operating angles will cause engine damage. This DOES NOT IMPLY machine is stable to maximum angle of safe engine operation. POWER U.S.
METRIC Cooling medium 50/50 antifreeze, see MAINTENANCE for more information Injection 1991 lbw/in 2 140 kgf/cm 2 Displacement 68.53 in 3 1123 cm 3 Bore 3.07 in 7.70 cm Stroke 3.09 in 7.86 cm Engine manufacturer's gross power rating @ 3150 rpm 25 hp 18.6 kW Maximum governed speed as installed (no load) 3160 rpm 3160 r/min Flywheel horsepower (full load) 22 hp 16.4 kW Parking brake Disc, hydraulic pressure released Transmission Belt drive through gearbox reduction *Maximum tilt angle fore & aft 30 ° 30 ° *Maximum tilt angle side 30 ° 30 ° Clutch Electric over hydraulic Tracks 230 x 39 x 72 FP Number of cylinders 3 Engine:
Kubota D1105-E diesel POWER DELIVERY SYSTEM p Trencher drive HT25 POWER U.S. METRIC Engine: Kubota D1105-E diesel Cooling medium 50/50 antifreeze, see MAINTENANCE for more information Injection 1991 lbw/in2 140 kgf/cm2 Number of cylinders 3 Displacement 68.53 in3 1123 cm3 Bore 3.07 in 7.70 cm Stroke 3.09 in 7.86 cm POWER U.S. METRIC Engine: Kubota D1105-E diesel Cooling medium 50/50 antifreeze, see MAINTENANCE for more information Injection 1991 lbw/in2 140 kgf/cm2 Number of cylinders 3 Displacement 68.53 in3 1123 cm3 Bore 3.07 in 7.70 cm Stroke 3.09 in 7.86 cm