13 Maintenance 13.5 Engine 67089 As soon as the drain plug (2) has been loosened, drain the accumulated amount of water and col- lect it in a container. Observe the general warnings at the beginning of the "Maintenance" chapter. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. Fill fuel tank. Drain condensed water. - Connect the hose to the bolt (2). - Hold a suitable container for the condensation collected in the sight glass (4) beneath the hose.
- Loosen bolt (2). - Collect escaping liquid in a suitable container. - Tighten bolt (2). Bleed fuel system. 4 1 2 23 29517 86114 13.5.15 Changing the fuel pre-filter (accessory) The fuel pre-filter is accessible after opening the right- hand side panel. Observe the general warnings at the beginning of the "Maintenance" chapter. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 287