CLAAS Dominator 150 / 140 / 130 — 13.5.15 Changing the fuel pre-filter (accessory)

13 Maintenance 13.5 Engine 67089 Drain condensation at the fuel prefilter. Close the shut-off tap of the fuel system. Drain fuel from filter. - Hold a suitable container for the remaining fuel in the sight glass (4) beneath the hose. - Loosen bolt (2). - Loosen the toggle bolt (11) by approx. 2 revolutions. - Collect escaping liquid in a suitable container. - Tighten bolt (2). Unscrew toggle bolt (11) and remove cover (9). Remove filter cartridge (7). 11 9 4 1 2 29517 24 10 11 9 8 7 5 6 4 3 2 25 13806 11 WARNING: Use of unpermissible spare parts or lubricants. 9 8 Machine damage or increased wear.

Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement! The use of genuine CLAAS spare parts and lubricants is recommended. 4 1 2 26 29517 Replace damaged seal (8). Observe installation position of seal! Install new filter. Press straps of the filter into the housing! Tighten toggle bolt (11). Replace damaged seal (3). Tighten bolt (2). Open the shut-off tap of the fuel system. Bleed fuel system. 288 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 Designation 2 Drain plug 3 Seal 4 Sight glass 5 Seal 6 Housing 7 Filter cartridge 8 Seal 9 Lid 10 Seal 11 Toggle bolt