Cylinder Head and Valves 10. Install JDG1184-2-3 Bracket Clamp (D) onto rocker arm rail as shown, and tighten cap screw (B) finger tight. IMPORTANT: Use only the 10 mm cap screw (B) that is provided in JDG1184 Nozzle Sleeve Replacement Set. Cap screws exceeding 35 mm (1.375 in.) can damage the camshaft bushings. 02 020 53 RG9170A –UN–21JUL99 11. Tighten cap screws and nut to the following specifications. Tighten Hardware Guide screw holding bracket cap screw (A) to 40 (30 lb-ft.). Bracket clamp cap screw (B) to 68 (50 lb-ft). Driver nut (C) to 115 (85 lb-ft).
A—Guide Sleeve Holding Bracket Cap Screw B—Bracket Clamp Cap Screw C—Driver Nut D—JDG1184-2-3 Bracket Clamp Continued on next page DPSG,OUO1004,929 –19–16JUL99–14/15 CTM100 (06APR04) 02-020-53 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=125