Delphi — Replace Unit Injector Sleeve in Cylinder Head Using JDG1184

Cylinder Head and Valves 12. Assemble small end of 8132 Adapter (A) onto JDG1184-2-1 Swedge Arbor (B). 13. Assemble large end of adapter onto D01300AA 2.2 kg (5 lb) Slide Hammer (C). 02 020 54 14. Position tip of swedge into guide sleeve and drive swedge through sleeve tip. Withdraw swedge with slide hammer. RG9171A –UN–21JUL99 15. Remove all tooling. After all required sleeves are replaced, refill cooling system and pressure test for leakage. Remove Swedge A—8132 Adapter B—JDG1184-2-1 Swedge Arbor C—D01300AA Slide Hammer 16. Install electronic unit injector and wiring harness. Refer to the appropriate fuel system repair manual. Delphi/Lucas ECU controlled fuel systems:

See REMOVE AND INSTALL ELECTRONIC UNIT INJECTORS in CTM115, Section 02, Group 090. John Deere Level 6 ECU controlled fuel systems: See REMOVE AND INSTALL ELECTRONIC UNIT INJECTORS in CTM188, Section 02, Group 090 (dual rail fuel systems). See REMOVE AND INSTALL ELECTRONIC UNIT INJECTORS in CTM188, Section 02, Group 091 (single rail fuel systems). 17. Install rocker arm assembly. (See INSTALL ROCKER ARM ASSEMBLY in this group.) DPSG,OUO1004,929 –19–16JUL99–15/15 CTM100 (06APR04) 02-020-54 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=126