Cylinder Head and Valves CTM100 (06APR04) 02-020-55 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=127 Clean and Inspect Top Deck of Cylinder Block 1. Remove gasket material, rust, carbon, and other foreign material from top deck using a powered brass or copper (soft) wire brush. DO NOT use a steel wire –UN–05DEC97 brush. 2. Clean threaded holes in cylinder block using JDG978 Special Tap (A) or an equivalent M16 x 2.0 x 140 mm RG8210A (5.50 in.) long tap. 3. Use compressed air to remove debris and fluids from Cleaning Head Bolt Threads cap screw holes. Replace block if thread damage is detected. 4. Inspect and measure top deck for flatness. Service as required.
(See MEASURE CYLINDER BLOCK, in Group 030.) –UN–21MAY98 5. Clean all oily residue and dirt from top deck before installing head gasket. A—JDG978 Special Tap RG8208 Measuring Block Top Deck Flatness RG,RG34710,93 –19–16OCT00–1/1 02 020 55