Delphi — Preliminary Liner, Piston, and Rod Checks

CTM100 (06APR04) 02-030-5 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=145 Cylinder Block, Liners, Pistons, and Rods Preliminary Liner, Piston, and Rod Checks Scuffed or Scored Pistons: • Improper periodic service. • Poor operating conditions. • Overheating. • Coolant leakage into crankcase. • Overfueling. • Excessive cylinder liner taper. • Insufficient lubrication. • Insufficient cooling. Mottled, Grayish or Pitted Compression Rings: • Improper piston-to-liner clearance. • Coolant leakage into crankcase. • Internal coolant leaks. • Misaligned or bent connecting rod. • Improperly installed piston. Dull Satin Finish and Fine Vertical Scratches on • Low oil level. Rings:

• Improper operation. • Incorrect connecting rod bearing clearance. • Dirt and abrasives in air intake system. • Carbon build-up in ring groove. • Improper engine break-in. Piston Pin and Snap Ring Failure: • Worn piston. • Contaminated oil. • Misaligned connecting rod. • Distorted cylinder liner. • Excessive crankshaft end play. • Plugged piston cooling orifice. • Incorrect snap rings. • Ingestion of dust through air intake. Broken Connecting Rod: Worn or Broken Compression Rings: • Inadequate piston-to-liner clearance. • Insufficient lubrication. • Worn connecting rod bearing. • Insufficient cooling. • Distorted cylinder liner. • Improper ring installation. • Piston pin failure.

• Improper timing. • Abrasives in combustion chamber. Cylinder Liner Wear and Distortion: Clogged Oil Control Ring: • Incorrectly installed compression rings. • Insufficient lubrication. • Improper oil. • Uneven cooling around liner. • Excessive blow-by. • Inadequate piston-to-liner clearance. • Contaminated oil. • Liner bore damage. • Improper periodic service. • Low operating temperature. Warped Cylinder Block: Stuck Rings: • Insufficient cooling. • Improper oil classification. RG,RG34710,1112 –19–06MAY99–1/1 02 030 5