Cylinder Block, Liners, Pistons, and Rods Connecting Rods—General Information Earlier engines have the traditional tongue-and-groove between the connecting rod and cap (A). Later engines have the PRECISION JOINT rod and cap (B). 02 030 6 To create the PRECISION JOINT , the connecting rod is notched with a laser beam. Then a precision mandrel in the rod bore is powered to separate the cap from the rod at the joints (C). RG10300 –UN–27AUG99 Both types of rods provide a strong joint. Removal and installation is similar, with differences noted, including different torque specifications for cap screws. Connecting Rods IMPORTANT: Replace rods with the same type.
Do Not mix tongue-and-groove with PRECISION JOINT rods in the same engine. See parts catalog for recommendations. A—Tongue-and-Groove Rod (Early Engines) B—PRECISION JOINT Rod (Later Engines) C—PRECISION JOINT Details RG9616 –UN–02DEC98 PRECISION JOINT Rod (Later Engines) PRECISION JOINT is a trademark of Deere & Company DPSG,OUO1004,871 –19–30JUL99–1/1 CTM100 (06APR04) 02-030-6 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=146