Cylinder Block, Liners, Pistons, and Rods 3. Use D17006BR Hone according to instructions supplied with tool to obtain a 45 ° cross-hatch pattern. Thoroughly clean liners after deglazing. (See CLEAN CYLINDER LINERS, next in this group.) 02 030 18 R26165 –UN–13DEC88 Liner Cross-hatch RG,RG34710,111 –19–30SEP97–2/2 Clean Cylinder Liners 1. Use a stiff bristle brush to remove all debris, rust, and scale from OD of liners, under liner flange, and in O-ring packing areas. Make certain there are no nicks or burrs in areas where packings will seat. IMPORTANT: Do not use gasoline, kerosene, or commercial solvent to clean liners. Solvents will not remove all the abrasives from liner walls. 2.
Thoroughly clean liner ID with a 50 percent solution of hot water and liquid detergent. 3. Rinse thoroughly and wipe dry with a clean rag. 4. Swab out liner as many times as necessary with clean SAE 10W oil. 5. Clean liner until a white rag shows no discoloration. RG,RG34710,112 –19–30SEP97–1/1 CTM100 (06APR04) 02-030-18 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=158