Crankshaft, Main Bearings, and Flywheel NOTE: DO NOT PRY crankshaft on No. 5 main thrust bearing. 8. Tighten all main bearing cap screws (including No. 5) to the following specification. 6. Gently pry crankshaft rearward and then forward to align thrust washers on No. 5 main thrust bearing. Specification Crankshaft Main Bearing Cap Screws—Final Torque 320 (236 lb-ft) .......................................... 02 040 30 7. Tighten No. 5 main thrust bearing cap screws to the following specification. 9. Turn crankshaft by hand. If it does not turn easily, disassemble parts and determine the cause.
Specification Crankshaft Main Bearing Cap Screws—Initial Torque 68 (50 lb-ft) .............................................. Continued on next page RG,RG34710,176 –19–05SEP02–2/3 CTM100 (06APR04) 02-040-30 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=226