Delphi — Install Crankshaft Vibration Damper and Front Oil Seal

Crankshaft, Main Bearings, and Flywheel 7. Install large washer onto front nose of crankshaft to secure damper to crank. Tighten cap screws in sequence shown to specifications. 02 040 Specification Damper Hub Cap Screws— Torque 125 (92 lb-ft) ........................................................................... 42 RG8175 –UN–21MAY98 8. If required, install pulley on damper and tighten cap screws to specifications. Specification Pulley-to-Damper Cap Screws— Torque 125 (92 lb-ft) ........................................................................... Installing Damper Retainer Cap Screws 9.

Install front seal-to-timing gear cover cap screws and tighten to specifications following sequence in lower illustration. Specification Front Oil Seal Cap Screws— Torque 15 (11 lb-ft) ............................................................................. RG10247 –UN–30JUL99 Damper Torque Sequence RG8809 –UN–20MAY98 Front Seal Torque Sequence RG,RG34710,180 –19–13AUG99–4/4 CTM100 (06APR04) 02-040-42 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=238