Delphi — Adjust Front Timing Gear Backlash

Camshaft and Timing Gear Train At this location the keyway in crankshaft drive gear will be at the 12 o’clock position, visible when vibration damper is removed. This is TDC of No. 1 cylinder’s compression stroke. Also, with timing pin installed in camshaft and crankshaft slots, this ensures that camshaft-to-crankshaft timing is within specification. 02 050 5 RG,RG34710,190 –19–19SEP02–2/6 5. Loosen all six camshaft gear retainer cap screws. 6. Loosen three upper idler gear bearing carrier cap screws (B), so that carrier can be moved by hand. Do not loosen more than required for ease of assembly. NOTE: Upper hole on template is larger and fits over upper cap screw.

This ensures proper placement of template when installed. RG8237 –UN–05DEC97 7. Remove two lower cap screws (C) from upper idler gear thrust plate and install JDG993 Timing Gear Backlash Template (A) as shown. Re-install two lower cap screws through template and tighten to specification. Installing JDG993 Backlash Template A—JDG993 Timing Gear Backlash Template B—Upper Idler Gear Bearing Carrier Cap Screws C—Lower Cap Screws Specification Upper Idler Gear Thrust Plate Cap Screws—Initial Torque 35 (26 lb-ft) ............................................. Continued on next page RG,RG34710,190 –19–19SEP02–3/6 CTM100 (06APR04) 02-050-5 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=245