Delphi — Replace Camshaft Bushings

Camshaft and Timing Gear Train 9. No. 3 Bushing: Install JDG968-1 Bushing Remover in front of tower No. 5 and JDG968-3 Guide in rear of tower No. 6. 02 050 10. Install 313793 Forcing Screw with double nut toward rear of engine. 22 11. Use a 152.4 mm (6.0 in.) extension with ratchet to reach double nut. 12. No. 4 Bushing: Install JDG968-1 Bushing Remover in rear of No. 7 tower and JDG968-3 Guide in front of No. 6 tower. 13. Install 313793 Forcing Screw with double nut toward rear of engine. No extension needed. 14. Thoroughly clean bushing bores in cylinder head and inspect for damage. Clean lubricating oil holes as needed. RG,RG34710,196 –19–25OCT00–2/7 Install Camshaft Bushings IMPORTANT:

ALWAYS install bushings from front side of cylinder head bushing bore and drive toward rear. 1. No. 1 Bushing: RG8334 –UN–09DEC97 Apply a light coat of TY6333 or TY6347 High Temperature Grease to ID of bushing bore in cylinder head. 2. Align notch (A) in new camshaft bushing with notch in JDG968-4 Alignment Sleeve (B). Position JDG968-2 Bushing Installer (C) onto end of sleeve with index slot engaged in notches in bushing and sleeve. Positioning Replacement Bushing on Installer A—Notch Alignment B—Alignment Sleeve C—Bushing Installer Continued on next page RG,RG34710,196 –19–25OCT00–3/7 CTM100 (06APR04) 02-050-22 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=262