Camshaft and Timing Gear Train Align SAE Front Auxiliary Drive Adapter IMPORTANT: Front auxiliary drive adapter (A) MUST BE properly aligned with center of gear spline whenever front or rear adapter is removed. Improperly aligned adapter may damage bearing assembly. 02 050 28 RG9036 –UN–25MAR99 1. Install SAE rear auxiliary drive adapter and tighten to specification. Specification SAE Rear Auxiliary Drive Adapter—Torque 110 (81 lb-ft) ........................................................... Installing JDG1144 Alignment Tool 2. Install SAE front adapter and tighten four mounting stud nuts (B) finger tight. 3.
Install JDG1144 Alignment Tool (C) onto gear flange and into adapter bore to properly center adapter with gear spline. RG9037 –UN–16NOV00 4. Tighten mounting stud nuts to specifications. Specification SAE Front Auxiliary Drive Adapter Housing Nuts—Torque 50 (37 lb-ft) ...................................... JDG1144 Alignment Tool Installed Remove alignment tool. A—Auxiliary Drive Adapter B—Mounting Stud Nuts C—JDG1144 Alignment Tool RG,RG34710,199 –19–13AUG99–1/1 CTM100 (06APR04) 02-050-28 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=268