Delphi — Remove, Inspect, and Install Oil Pressure Regulating Valve

CTM100 (06APR04) 02-060-3 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=271 Lubrication System Remove, Inspect, and Install Oil Pressure Regulating Valve NOTE: Refer to OIL FILTER AND OIL CONDITIONING HOUSING ASSEMBLY, earlier in this group, for illustrated location of valves. –UN–06DEC97 Oil pressure regulating valve is in same location on oil cooler cover/valve housing for remote filter applications. RG8245B 1. Remove oil pressure regulating valve assembly (C) from oil filter housing (G). Discard O-ring. Removing Pressure Regulating Valve C—Oil Pressure Regulating Valve Assembly 2. Inspect valve and valve bore for damage. Replace if G—Oil Filter Housing necessary. 3.

Clean all parts with a brass or copper wire brush and solvent. Dry with compressed air. 4. Check spring for proper compression. Specification New Oil Pressure Regulating Valve Spring—Free Length.......................................... 86.4 mm (3.40 in.) Working Load at 76—84 N (17— 19 lb-force)................................................................... 42.0 mm (1.65 in.) 5. Dip all parts in clean engine oil. Insert valve and spring assembly in housing. 6. Install plug using a new O-ring and tighten to specifications. Specification Oil Pressure Regulating Valve Plug—Torque.................................................................

100 N•m (74 lb-ft) RG,RG34710,209 –19–28JUL99–1/1 02 060 3