Cooling System 7. Install belt and position onto tensioner. 02 070 RG,RG34710,226 –19–18SEP02–2/2 8 Remove Coolant Pump CAUTION: Explosive release of fluids from pressurized cooling system can cause serious burns. DO NOT drain coolant until it has cooled below operating temperature. Always loosen radiator pressure cap or drain valve slowly to relieve pressure. RG8246 –UN–06DEC97 1. Loosen radiator pressure cap and open coolant drain valve (A) on oil cooler housing. Drain all coolant from engine block. Coolant Drain Valve A—Coolant Drain Valve RG,RG34710,227 –19–17SEP02–1/2 2. On 6125ADW engines, remove primary fuel filter/water separator (A) and mounting bracket. 3.
On all engines, remove engine oil cooler and housing assembly (B). (See REMOVE OIL FILTER AND VALVE HOUSING/OIL COOLER COVER AND VALVE HOUSING, in Group 060.) RG8825 –UN–26JUL99 4. Disconnect coolant pump-to-thermostat housing bypass hose and remove from coolant pump tube fitting. 5. Remove three cap screws securing coolant pump-to-front plate and remove coolant pump (C). Removing Primary Fuel Filter 6. Remove and discard O-ring (D). A—Primary Fuel Filter/Water Separator B—Oil Cooler and Housing Assembly C—Coolant Pump D—O-Ring RG8261B –UN–06DEC97 CTM100 (06APR04) 02-070-8 P OWER T ECH 10.5 L & 12.5 L Diesel Engines Removing Coolant Pump RG,RG34710,227 –19–17SEP02–2/2 040604 PN=292