Air Intake and Exhaust System Perform Axial Bearing End Play Test This test will give an indication of the condition of the axial bearing within the center housing and rotating assembly. 02 080 1. Mount magnetic base dial indicator so that indicator tip rests on end of shaft. Preload indicator tip and zero dial on indicator. 14 RG8497 –UN–21MAY98 2. Move shaft axially back and forth by hand. 3. Observe and record total dial indicator movement and compare to following specification. Measuring Axial End Play Specification Garrett Turbocharger Axial Bearing—End Play 0.025—0.114 mm (0.0010—0.0045 in.) ........................................................
Borg Warner Turbocharger Axial Bearing—End Play 0.0635—0.1143 mm (0.0025—0.0045 in.) .................................................... If bearing end play is not within specification, replace turbocharger. RG,RG34710,244 –19–03NOV00–1/1 Repair Turbocharger Turbochargers used on the engines covered in this manual are available through service parts as a complete remanufactured assembly only. Individual components for repair are not available. RG,RG34710,245 –19–30SEP97–1/1 CTM100 (06APR04) 02-080-14 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=314