Delphi — Remove, Inspect, and Install Exhaust Manifold

CTM100 (06APR04) 02-080-19 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=319 Air Intake and Exhaust System –UN–05DEC97 RG8131 Exhaust Manifold Exploded View A—Sealing Rings (4 used) B—Sealing Ring Grooves C—Center Manifold Section D—End Manifold Sections (2 used) Inspect Exhaust Manifold 1. Inspect machined mating surfaces (ID and OD) for burrs, cracks or other imperfections which may IMPORTANT: Some early production exhaust prevent sealing rings (A) from sealing properly. manifold end sections (D) may have three sealing ring grooves (B) and 2. Inspect area past sealing ring locations for evidence may have been assembled with only of exhaust leakage. Inspect all sections for cracks.

one sealing ring. ALWAYS use two sealing rings during engine 3. Inspect and clean cylinder head and exhaust reassembly and use outer grooves manifold machined mounting surfaces. on manifold sections with three grooves. Continued on next page RG,RG34710,249 –19–13AUG99–2/3 02 080 19