Air Intake and Exhaust System Install Exhaust Manifold 1. Install guide pins (A) at upper threaded hole of each exhaust port as shown. 02 080 2. Install gaskets (B) on each guide pin as shown. 20 3. Install two sealing rings on both exhaust manifold end sections and assemble with center section. RG8132 –UN–05DEC97 4. Install manifold assembly (C) onto guide pins. 5. Apply PT569 NEVER-SEEZ Compound to exhaust manifold cap screws and tighten bottom row of cap screws finger tight. Be sure gaskets are properly positioned before installing cap screws. Exhaust Manifold Gaskets 6. Remove guide pins from top row and install cap screws finger tight. 7. Tighten all cap screws to specifications.
RG8133 –UN–05DEC97 Specification Exhaust Manifold-to-Head Cap Screws—Torque 70 (52 lb-ft) .............................................................. 8. Install turbocharger. (See INSTALL TURBOCHARGER earlier in this group.) Installing Exhaust Manifold A—Guide Pins B—Gaskets C—Manifold Assembly NEVER-SEEZ is a registered trademark of the Emhart Chemical Group. RG,RG34710,249 –19–13AUG99–3/3 CTM100 (06APR04) 02-080-20 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=320