Base Engine Operation The front and rear camshaft bushings receive oil from a hole in the respective rocker arm shaft. A drilled passage lines up with a drilled passage in the head to route oil to the bushings. adjacent valve rocker arm rollers (S). Oil then sprays on to the camshaft lobes. At the front of the unit injector rocker arms, oil sprays out the adjusting screw to lubricate the unit injector (T) and the adjacent valves and adjusting screws. The rocker arm shaft is cross-drilled to provide lubrication to each rocker arm bushing.
Some oil is routed from the top of the oil filter base through an external line to the turbocharger and is returned to the cylinder block crankcase through another external line. The unit injector rocker arms (Q) are cross-drilled to route oil from the bushing to each end of the rocker arm. At the roller end, oil flows through the roller bushing (R) and out to spray and lubricate the 03 120 6 RG,RG34710,1519 –19–16SEP02–3/3 CTM100 (06APR04) 03-120-6 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=338