Base Engine Operation The top thermostat is a non-blocking type. When it opens, coolant will flow to the radiator. The non-blocking type has a vent notch to provide an air bleed when the cooling system is filled. back to the oil cooler housing through a second external line (J). Coolant also flows in passages (O) around the unit injector sleeves (P). This helps to regulate the temperature of injected fuel. On water-to-air aftercooled engines, coolant is routed through an external line (I) to the aftercooler, then 03 120 10 RG,RG34710,1521 –19–09SEP02–3/3 Fuel System Theory of Operation NOTE: Fuel system operation is now covered in the following companion manuals:
CTM115—Lucas Electronic Fuel Systems With Lucas EUIs CTM188—Level 6 Electronic Fuel Systems With Lucas EUIs CTM115 covers earlier Tier I engines, while CTM188 covers later Tier II engines (with either dual-rail or single-rail fuel systems.) OUO1004,0000C29 –19–09SEP02–1/1 CTM100 (06APR04) 03-120-10 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=342