Delphi — Check for Excessive Engine Crankcase Pressure (Blow-By)

Observable Diagnostics and Tests Check for Excessive Engine Crankcase Pressure (Blow-By) 04 150 12 RG10428 –UN–30NOV99 Breather Tube A—Breather Tube Excessive blow-by coming out of the crankcase breather tube (A) indicates that either the turbocharger seals are faulty or the piston rings and cylinder liners are not adequately sealing off the combustion chamber. This is a comparative check that requires some experience to determine when blow-by is excessive. If excessive blow-by is observed, perform the following to determine if the turbocharger is causing the blow-by: 1. Remove the turbocharger oil drain line where it connects to the engine block and run the line into a bucket.

Run engine at high idle and check crankcase breather tube. Look for significant fumes and/or dripping oil coming out of the breather tube at fast idle, with no load. 2. Run engine at high idle, slightly loaded and determine if boost pressure is forcing oil through the drain line, and check crankcase breather tube to determine if blow-by has decreased. CTM100 (06APR04) 04-150-12 P OWER T ECH 10.5 L & 12.5 L Diesel Engines Continued on next page DPSG,RG40854,282 –19–10AUG99–1/2 040604 PN=360