Delphi — Check for Turbocharger Oil Seal Leak

Observable Diagnostics and Tests 3. If it appears that boost pressure is forcing oil through the drain line, and/or blow-by decreases with the drain line disconnected from the block, replace the turbocharger and retest. DPSG,RG40854,282 –19–10AUG99–2/2 CTM100 (06APR04) 04-150-13 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=361 Check for Turbocharger Oil Seal Leak Seals are used on both sides of the turbocharger rotor assembly. The seals are used to prevent exhaust gases and air from entering the turbocharger housing. Oil leakage past the seals is uncommon but can occur.

N–30NOV99 A restricted or damaged turbocharger oil return line can cause the housing to pressurize causing oil to leak by the –U seals. Additionally, intake or exhaust restrictions can RG10634 cause a vacuum between the compressor and turbocharger housing causing oil to leak by the seals. Turbocharger Oil Seal Leak 1. Remove intake tube (A) and exhaust pipe (B). A—Intake Hose B—Exhaust Flange NOTE: The intake tube from the air cleaner (not included C—Oil Return Line in picture) would not have to be removed for this test. 2. Inspect the intake tube and turbocharger turbine casing for evidence of oil leakage. If oil leakage is present, perform the following:

• Inspect turbocharger oil return line (C) for kinks or damage. Replace if necessary. • Check the air intake filter, hoses, and crossover tube for restrictions. • Check the exhaust system for restrictions to include position of exhaust outlet. 3. Perform necessary repairs and retest. DPSG,RG40854,283 –19–10AUG99–1/1 04 150 13