CTM100 (06APR04) 04-150-15 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=363 Observable Diagnostics and Tests Pressure Test Cooling System and Radiator Cap –UN–20JAN93 CAUTION: Explosive release of fluids from pressurized cooling system can cause serious burns. RG6557 Shut off engine. Only remove filler cap when cool enough to touch with bare hands. Slowly Pressure Testing Radiator Cap loosen cap to first stop to relieve pressure before removing completely. Test Radiator Cap: 1. Remove radiator cap and attach to D05104ST Tester using appropriate adaptor as shown. –UN–20JAN93 2. Verify with the applications specification manual that the correct cap is being used. RG6558 3.
Pressurize cap to cap’s specified pressure.1 Gauge should hold pressure for 10 seconds within normal Pressure Testing Cooling System range if cap is acceptable. 4. Remove the cap from gauge, turn it 180°, and retest cap. This will verify that the first measurement was accurate. Test Cooling System: NOTE: Engine should be warmed up to test overall cooling system. 1. Allow engine to cool, then carefully remove radiator cap. 2. Fill radiator with coolant to the normal operating level. 1If gauge does not hold pressure, replace radiator cap. Continued on next page DPSG,RG40854,284 –19–24SEP02–1/2 04 150 15